Oneida Bows Bowfishing Bow Pics

[idahofowlweather]

Originally Posted by JOneida

Here is an Orange and Black Marble finished by Rob at Moose Ridge Coatings and built to customers specs here at www.oneidabows.net.

oh man I want this bow... Joe this is what I want...Orange with Flat Blk limbs... send me the bill...lol...

Jake

[JOneida]

Originally Posted by idahofowlweather

oh man I want this bow... Joe this is what I want...Orange with Flat Blk limbs... send me the bill...lol...

Jake

Hi Jake we sent that bow to South Dakota last week. You order what you want and Rob at Moose Ridge Coatings will finish it for you and I will build the bow to your specs.

[JOneida]

Originally Posted by BOOOYAH-Scalebuster

That Kestrel is nice Joe. I like the shorter tip to tip length. Wish they would make the ospreys that short.

Tim, we can build an Oneida Osprey roughly 41 inches long from 22 to about 28 inch draw lengths.

[JOneida]

Here is another custom bow finished by Moose Ridge Coatings and built to spec for the customer. Here are some pics of Tooties Black Hawk II with a 452x string and JMB 6061 end caps.

[Bowbob59]

Another awesome job. Tootsies bow needs a set of custom grips Joe.

I love this place

Bob

[MooseRidge]

Originally Posted by JOneida

Hi Jake we sent that bow to South Dakota last week. You order what you want and Rob at Moose Ridge Coatings will finish it for you and I will build the bow to your specs.

That's right I ain't picking on what I do just how it looks when I'm done.

[MooseRidge]

Good thing I can't spell and that last bows limbs need to be redone. Is it me or is the BlackHawk slanted to the right? I guess because of both is why they make razor blades and sand paper.

[IBB1GDADDY2]

Cant wait to see how Travis's bow looks !

[IBBOWFISHING]

those bows look awesome

[thebowfisher]

Thanks Joe, the bow looks awesome. I am thinking of a hawk in the mountain dew colors would be the next choice. I am going to keep my eye out for one unless I get some money saved for a new one. I can keep hoping.
Thanks again.

[JOneida]

Thanks Dan, I spoke with Rob from MooseRidgeCoatings.com and he says Mountain Dew colors works whenever your ready. His finishes are all custom one of a kind, check them out

[JOneida]

Here are some pics of a custom CPOneida Osprey finished by Rob at Moose Ridge Coatings and built by us using our new end caps.

[drumie]

Joe, That one looks AWESOME!!! I can't wait to get it!!!

[JOneida]

On the way priority this afternoon

[Mike]

Originally Posted by JOneida

Here are some pics of a custom CPOneida Osprey finished by Rob at Moose Ridge Coatings and built by us using our new end caps.

Good looking caps Joe

[MooseRidge]

Originally Posted by IBB1GDADDY2

Cant wait to see how Travis's bow looks !

Me neither!!! Oh wait that's right. How about the answer from a little bird told me soon very soon. 3 out of the 5 problems have been tested and solved the other 2 are going to take me standing on my head until all the blood goes to my brain and I come up with answers. And in that lies the problem of custom never done it before workings.

[idahofowlweather]

Originally Posted by MooseRidge

That's right I ain't picking on what I do just how it looks when I'm done.

well your doing a fine job IMHO... that orange a blk bow runs thru my head all day long... just need to get thru my Vac and I will be calling Joe up for one...

[JOneida]

Quote:

Originally Posted by JOneida
Here are some pics of a custom CPOneida Osprey finished by Rob at Moose Ridge Coatings and built by us using our new end caps.

Good looking caps Joe

Thanks Mike, we just recieved more of our new caps, and this is just the beggining, we have several projects in the works at this time and when ready will post them here

[Mike]

Originally Posted by JOneida

Quote:

Good looking caps Joe

Thanks Mike, we just recieved more of our new caps, and this is just the beggining, we have several projects in the works at this time and when ready will post them here

I can't wait to see what you come up with next

[Bowbob59]

Great to hear more sets are in stock, I have to replace the spare set I have as a guy with a stealth wanted them put on the rebuild of his limbs.

Keep up the great work Joe

ILTP

Bob

[dogcatcher]

sweet homie..nice bows

[buelltroll]

People actually fish with these bows??? Damn things are waaaay too pretty for me to be sloggin em thru the slop. How much does one of these run? Stock and custom?? Awesome looking bows either way

[JOneida]

Originally Posted by buelltroll

People actually fish with these bows??? Damn things are waaaay too pretty for me to be sloggin em thru the slop. How much does one of these run? Stock and custom?? Awesome looking bows either way

ALL CUSTOM FINISHED/BUILT TO SPEC ONE OF A KIND

CPOneida Eagle Bows stock factory bows are 599.00

Our custom bows with riser any color by MOOSE RIDGE COATINGS .com
and a two color string is 659.00. With JMG6061 end caps 699.00. Many more options available. Please Contact us for more information.

[IBB1GDADDY2]

Awesome work Joe ! Can't wait to see the rest.

[JOneida]

Whitetigers Osprey with JMB6061 End Caps and another great Moose Ridge Coatings finish with custom grips by BowBob.

[BigRed1439]

Sexy Sexy did i mention the word sexy yet BOOOYAH makeing my mouth water

[MooseRidge]

Originally Posted by idahofowlweather

well your doing a fine job IMHO... that orange a blk bow runs thru my head all day long... just need to get thru my Vac and I will be calling Joe up for one...

Thank you for the feedback and support -- Joe and I can use it all on certain days. Kindda like today for me -- I think Joe has 9 bows sitting here in the shop right now.

[Mike]

Originally Posted by JOneida

Whitetigers Osprey with JMB6061 End Caps and another great Moose Ridge Coatings finish with custom grips by BowBob.

That's to purdy to take Bowfishing

[JOneida]

Originally Posted by Mike

That's to purdy to take Bowfishing

Mike, and the best part as we all know that no matter how good MOOSERIDGECOATINGS make them look ONEIDA'S SHOOT EVEN BETTER

[firstflight]

cant wait to get mine sent back and the new end caps and stainless put on it it has not missed a beat and joe built it to my specks thanks joe now just have to get the boy one he is on me good right now.

[JOneida]

Originally Posted by firstflight

cant wait to get mine sent back and the new end caps and stainless put on it it has not missed a beat and joe built it to my specks thanks joe now just have to get the boy one he is on me good right now.

Thanks Tim, your son has contacted us and we will get your son a

Moose Ridge Finished One of a kind Oneida Eagle Bow.

ONEIDA EAGLE BOWS Dependable smooooth hard hitting bows tested over time by thousands of satisfied customers WORLD WIDE.

Heres a couple more pics of Tims bow.

[war archer]

Originally Posted by JOneida

Here is an Orange and Black Marble finished by Rob at Moose Ridge Coatings and built to customers specs here at www.oneidabows.net.

wat are your prices on them and do you have the year on this one

[JOneida]

These bows without stainless run 375 and with stainless we get 405.
These bows are like new and the finishes are all one of a kind. Even using the same color combonations they all look different.

[IBB1GDADDY2]

MooseRidge and Joe are building the sharpest looking Oneidas money can buy !
Joe I'm more excited about Travis's bow than he is.
I can't wait to see it.
Hold onto your hat guys this bow will be a show stopper.

[war archer]

how many times has it been shot and wat year also wats the poundage


my dads a deler but dosent have his store ready.

[IBBOWFISHING]

awesome bows guys

[JOneida]

Originally Posted by war archer

how many times has it been shot and wat year also wats the poundage


my dads a deler but dosent have his store ready.

The Orange Marble bow in the picture is all new parts with the exception of the riser and pylons and refurbished hinges which were refinished with a new hinge pin. The bow in the picture is a 35/55 pound bow if I remember correctly.

[war archer]

do you have any black egle2s and wats your price

[JOneida]

Originally Posted by war archer

do you have any black egle2s and wats your price

We have a list of used bows to post tommorow or sunday and I believe there are a couple used BEII's and the prices vary. Pm sent

[war archer]

wats the diference in the talon and ospry and can the ospry be used hunting?

[MooseRidge]

Originally Posted by IBB1GDADDY2

MooseRidge and Joe are building the sharpest looking Oneidas money can buy !
Joe I'm more excited about Travis's bow than he is.
I can't wait to see it.
Hold onto your hat guys this bow will be a show stopper.

I've been told that the right colors were delivered on friday to the coater. Should be finished up soon!!!!!

[MooseRidge]

Originally Posted by war archer

how many times has it been shot and wat year also wats the poundage


my dads a deler but dosent have his store ready.

the bow is a lefty and Joe's a righty so probably never been shot since it's rebirth. And if I know Joe the daylight these bows see is when they come out for the pictures. If it's got all new parts and a brand new coating does that make it a 2010?

[JOneida]

Here are a few pictures of bows finished by moose ridge coatings and built to customers specs by Oneida Bows.

Steves marbled candy smoke fade to black.


Lisa's Prismatic Black Osprey with purple black swirl.


Brooke's candy lime fade to candy green oneida osprey.


Macy's blue shimmer with candy rasberry oneida osprey.


Lukes candy red fade to black oneida osprey.

[turkeymansc]

they look great!

[deer_predator]

[Gargod]

WOW...those are awesome Joe! I need those in the shop...they'd be gone by the weekend!

[DocHotch]

Thanks Joe ! Can't wait to get them!

[JOneida]

Here are a couple pictures of Travis's Osprey. Will get more pics tommorow.

[BigRed1439]

The sun Cuming up on Lake Sam Rayburn

[BOOOYAH-Scalebuster]

Good work Joe!! Some good looking rigscant wait to see what else you got going

[shalloWtrSlayer]

Originally Posted by JOneida

For Your One Of A Kind Custom Bow www.oneidabows.net

Here is a picture of my Osprey with our new end caps.

thats the coolest coolered bow iv ever seen i want an osprey so bad

[JOneida]

Originally Posted by shalloWtrSlayer

thats the coolest coolered bow iv ever seen i want an osprey so bad

Thanks TXslaYER, Rob at mooseridgecoats.com does great work and all one of a kind.
Here are a few more pics of a bow we did for Travis.

[shalloWtrSlayer]

if i got a custom oneida thats the color i would get and i like the one u just posted

[IBB1GDADDY2]

Originally Posted by JOneida

Here are a couple pictures of Travis's Osprey. Will get more pics tommorow.

Looks awesome Joe ! The Gator Gar Osprey is nice ! travis cant wait to get his hands on it.
Can't wait to see the rest of the pictures.

[BigRed1439]

man that bow is sweet

[hotrodderscott]

My Green Screamer from Joe

[IBB1GDADDY2]

Joe the bow looks absolutely awesome. Travis is one lucky dude. Rob done a fantastic job on the bow.

Steve's bows look awesome too.
You and Rob have set the standard in custom Oneida Ospreys !
I said Ospreys not an imitation.............

[Bowbob59]

Rob, without a doubt you have taken this work to a new level. Even dips lack that one of a kind professional look you bring to these bows. I gotta get some of it in my collection.

I think in many ways Joe shows how long and how deep his dedication to this bow line is. He has stepped up on many levels (and more in the works) to give the bowfishing comunity choices to customize and to soon upgrade there rigs even more than just end caps.

Joe does not need phrases like guru or master, he knows this bow. He knows how to build them and keep them running. He wants to help others keep their bows running well and looking good. No bragging rights, not a discount bargin bin operation..................... just good solid service.

Sweet lookin bows, Bravo to you both.

BTP

Bob

[VLODPG]

Originally Posted by Bowbob59

Rob, without a doubt you have taken this work to a new level. Even dips lack that one of a kind professional look you bring to these bows. I gotta get some of it in my collection.

I think in many ways Joe shows how long and how deep his dedication to this bow line is. He has stepped up on many levels (and more in the works) to give the bowfishing comunity choices to customize and to soon upgrade there rigs even more than just end caps.

Joe does not need phrases like guru or master, he knows this bow. He knows how to build them and keep them running. He wants to help others keep their bows running well and looking good. No bragging rights, not a discount bargin bin operation..................... just good solid service.

Sweet lookin bows, Bravo to you both.

BTP

Bob

Well stated, I couldn't have put into words any better!

[Slobasaurus slayer]

how do these shoot in deep water compared to a stendard bow or just all around which is better and why?

[IBB1GDADDY2]

From what I've found an Oneida even at lower poudage packs alot of punch.